19” GERMAN RACK 15U 60 x 60 cm.

19” GERMAN RACK 15U 60 x 60 cm

FEATURES
<& Designed and Manufactured To comply Standards of ANSI/EIA-310D-1992 [Rev.EIA-310Cl,
IEC60297-1, IEC60297-2, BS5954 Part:2, DIN 41494, 19″ Standard.
<& Modular Knock Down Easy to assembly, transportation.
<& Manufactured
– Made from 1.5mm Electro-Galvanized Steel Sheet.
– Mounting Pole, Frame structure and Base made from 2.0mm Electro-Galvanized
Steel Sheet.
– Castor Base Stand made from 3.0mm steel.
– 100% rust proof.
<& Structure It was mounted by wedge lock to increase strength.
<& Mounting Pole Designed to be C-shape angle with 1Ox10mm square punching hole to
increase strength and flexible to adjust freely with screened Rack unit [U) on the
mounting pole.
<& Front Door Was the steel frame with acrylic 5.0mm thickness and 38cm width, with
film protection [About the height will follow as the size of Rack unit). Door edge with
3-fins type of dust proof rubber seal [Gray color). Support security lock [Cam lock type)
with 19″Germany master key, and trademark embossing on the top.
<& Rear Door 34 x 23cm Steel door and perforated ventilation slot with dust filter on the
bottom side. The inside is 70mm width T-Frame [Excluding for 15U Rack) to prevent
the swinging door. Door edge with 3-fins type of dust proof rubber seal [Gray color).
Support security lock with 19″ Germany master key same as the front door set.
<& Hinge Made from 3 pieces of special high strength [ABS) or other materials
[asrequestedl, without disturbance noise and rust-free. The front and rear door can
reverse to change the opening direction from the left or right side by adjusting screw
at the nut of hinge.
<& Side Panels Was the steel frame with security lock and master key same as the front
door set and provided 19″ Germany slide latch on the top part for easy removable.
The inside is 70 mm width vertical frame [Excluding for 15U Rack) for more strength.
<& Roof Cover Can be mounted the 4″ fan sets, up to 6 fans maximum mounted for
ventilation and able to change to vented raised roof cover in optional.
<& Base It’s same dimension as the cabinet for full weight support. The bottom are 3 parts
plinth and slide shutter with gray sponge for cable access and protect animal creep
into the cabinet, can be mounted the ventilating fan.
<& Pedestal Up and down adjustable stand with castor base. The 4 pedestal’s base with
180° freely tilt to suit the slope floor and made from Black ABS to protect the electrostatic
and leaking electricity.
<& Castor Made from 50mm diameter of Black Nylon 6, swiveling at 360°
and convenience
to move, support the static load with 150kg/castor.
@ New Shine Light Gray Two-tone color painted by Electrostatic powder coat system with
international standards ASTM.
@ Grounding System 2.5mm copper wire with yellow and green color stripe which
connect between all removable part of rack.
@ Screw Set Provided screws, captive nuts, plastic washer with nickel plating and M6
standard.
@ Static Load Rating 1,200kg load, certified by KM UTT. The result shall be less than 3.0mm
or 0.14%.
@ Manufacturing and Distribution Certified by ISO 9001 : 2015
@ Index of Protection IP 40.

Additional information

range-name
GERMANY RACK

sub-range-name
19” GERMAN RACK , G3 Series

part-range-name
19” GERMAN CABINET RACK , G3 Series

primary-brand
GERMAN RACK

G3-60915